Parts & Accessories
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
$34.99 $49.99 30% Off
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides. - All the parts needed to mount a Flux Expert taillight to a second bike - Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key. - Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
The strand of 23 LEDs keep a hammock, tent, or campsite lit at night. - Twilights are not one, but a string of 23 LED lights to show the way - Powered by 3 AAA batteries (Not included) - Over 72 hours of burn time - Includes carry case with Velcro closure - Length: 120 - Weight: 4oz
The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
$4.99 - $5.50
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Page 1 of 3 Next page