Parts & Accessories

Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

Keep your cargo where you go. Hold everything in place to make sure you arrive with what you left with. This elastic band includes hook clips to secure cargo to the rear rack (sold separately). Help keep your cargo in place. - Elastic band with hook clips to secure cargo to rear rack (sold separately) - Fits all Electra rear racks

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

This stem holder comes in classic black and is designed to attach your Basil basket to the front wheel of your bike. This system is suitable for use with both men and women’s bicycles with ease. If you’re after performance and durability, this attachment provides all the strength and stability you need, keeping your basket firmly fitted to your bike. Not only does this reduce maintenance, it also means you can put your bike through more without the worry of your basket coming free. Perfect for enjoying enhanced safety and stability on the go. What’s more, because of it’s quality steel construction, this component will hold up well against the elements and last you for a long time to come. The fastening system is also suitable for various types of bikes and fits stems with a diameter of 22 to 25.4 mm. Browse more essential items from the Basil range online today, from baskets and bags, to essential fasteners and fixing essentials. Features: - Basil Permanent-S II stem holder. - Designed for fitting of baskets to the front of your bike. - Made from hard-wearing steel for longevity. - Suitable for handlebar stems measuring 22 to 25.4 mm.

Tool Wrap WP

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Genuine replacement parts Mount your rack & fender with an under fender stay MIK: Mounting Is Key For optimal rigidity - For use with 405mm 700c fenders - Mounts to the frame at bottom bracket with an M6 bolt - Mounts to the cargo rack with an M6 bolt - Pre-drilled holes for mounting to the seatstay bridge - Mounts to the seatstay bridge with an M6 bolt - For use with Verve+, District+, Beryll+, and Mandara+ RIB models

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

- 4 removable plastic hooks - To tighten, pull inner cord over additional hook - 25cm x 25cm (10" x 10") unstretched - Durable 3.5mm diameter bungee cord

Phone Pouch

- 250mm seat stays for the Classic Disc Rack (PN 730387-01) - Sold as a pair

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

Surly Front Rack Hardware

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.