We stock chains for 5, 6, 7, 8, 9, 10 and 11 speed bikes from SRAM, Shimano, Campagnolo and KMC. We offer a verity of options and if we happen to not have what your looking for in stock we can order it.
Super hardened steel designed for high torque Singlespeed and BMX use.
The Box Four chain employs an 8-speed platform in a similar strategy to the Prime 9 but at a great price point. The chain is polished and then chemically treated to achieve corrosion resistance. We engineered the inner link spacing to be a little tighter than other 8-speed chains and is optimized for use with our Box Four Wide/Narrow Chainring.
The Cult 510 HD chain features teflon coating with stamped cult logos, heat-treated riveted pins and thicker side plates to increase strength. - Includes a pre-installed half link to make fine tuning the length easier. - Color: Black - Width: 1/2 x 1/8-inch - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin
The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams
The Campagnolo C13 EKAR Chain was developed specifically for the EKAR 1x13-speed gravel system. - Wide-narrow design allows for efficient drive, smooth shifts and high security - The narrow profile is lightweight, strong, and efficient - Strong, durable, links feature different grades of steel and coatings for strength and to withstand wear - Unique ultrasound bath lubrication impregnation system for long chain life - Uses a classic pin chain connector Specifications: - Links: 118 - Chain Connection Type: Pressed Pin - Drivetrain Speeds: 13 - Weight: 242g
Price point 11 Speed chain has a wider link design for increased shifting performance and reduced noise, and slotted links for reduced weight. - Designed specifically for use with Campagnolo 11 speed drivetrains only
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission. - Delivers extremely high performance levels and durability over time - Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components - Solid pins are aligned with the external surface for smoothness and precision - 5.15mm width is designed to produce faster and lighter shifting Specifications: - Links: 110 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Drivetrain Speeds: 12 - Weight: 241g
Campagnolo's Veloce 10-Speed chain boasts an anti-friction coating for a smooth, quiet drivetrain and outstanding durability. It's the perfect match for your Campy-endowed road machine.
The Campagnolo C13 EKAR Chain was developed specifically for the EKAR 1x13-speed gravel system. - Wide-narrow design allows for efficient drive, smooth shifts and high security - The narrow profile is lightweight, strong, and efficient - Strong, durable, links feature different grades of steel and coatings for strength and to withstand wear - Unique ultrasound bath lubrication impregnation system for long chain life - C-Link allows for easy removal and cleaning Specifications: - Links: 117 - Chain Connection Type: Quick Link - Drivetrain Speeds: 13 - Weight: 242g
For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.
New Super Record 12 Speed chain: slim, robust, smooth and precise. The chain, in all its apparent simplicity, plays a critical role in the cyclist's safety and in optimizing the entire transmission mechanism. The new Super Record 12 Speed chain also had to be redesigned from scratch to work with all the other new transmission components. Therefore, the first and most important objective was reducing its overall dimensions. Its width is now 5.15 millimeters, thanks to the new pins which are perfectly aligned with the links’ outer surfaces. The second objective was safeguarding its performance. This was achieved thanks to the Ultra-link system that makes the chain safe and durable, and a special treatment that guarantees extreme smoothness and precision shifting.
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Hollow pins for reduced weight - NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life - Links (links): 114 - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 255 grams
Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimized by hand in Denmark. This ultrafast chain has been optimized for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 600 km/370 miles. Apply CeramicSpeed UFO Drip after 600km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. CeramicSpeed uses chains from high-end brands to which an optimization treatment is applied. The CeramicSpeed UFO Chains go through a multi-step process, which involves polishing, cleaning, and application of two layers of treatment to achieve the most efficient chain possible. The UltraFast Optimization process is not highly technical, but it is very time consuming. In The Box: - 116 link Optimized Chain - Quick Link - Single Use UFO Drip sample - Disposable Gloves - Sticker Sheet
100 links of chain and a pre-assembled half-link. - Steel, cromized treatment - Lightweight design - Very strong pins & plates - Comes with extra half-link assembled for running any gearing - Links (links): 100 - Color: Black - Drivetrain Speeds: Single Speed - Chain Connection Type: Reusable Master Link - Weight: 382 g
The 4 Stroke is Eclat's team tested half link chain without weight saving slots in the links. If you’re snagging chain on crankarms, the extra beef on the 4 Stroke chain could make it a great choice for you. - Lightweight design - Strong pins & plates - Color: Black - Width: 1/2 x 1/8-inch - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes - Weight: 421 g
$29.99 - $34.99
The stroke is a half link chain with weight saving slots in the links. - Color: Black - Width: 1/2 x 1/8-inch - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes - Weight: 421 g
FSA’s quiet, efficient, and durable chain. Team Issue chains are nickel plated and chamfered to enhance shifting performance. - Tool-free connector link included - 6.4mm width - Weight: 275g
The K-Force Light chain is FSA’s premium offering for 11-speed systems. Whether you’re on the road or hitting the trail, you’ll certainly appreciate all the technology this chain offers. Hollow pins reduce weight, optimized outer plate shapes reduce shift noise, and plate chamfers decrease sprocket wear while increasing shifting precision. If you’re looking for a chain with unrivaled durability and performance, choose the K-Force Light. - Designed to be used with all 11-speed drivetrains - Nickel plated links w/FSA logo - Chamfered to optimize shifting performance - 5.5mm width - Tool-free connector link included - 245g
- 12-speed compatible - Quiet, efficient performance and superior durability - 5.25mm width - Nickel outer plated finish, Black inner plated finish - 250 grams (116 Links)
$101.63 - $161.98
- Patented carbon cords offer the tensile strength necessary to provide the smooth, greaseless, long-lasting ride advantage of a belt driven system (up to double the life of chains) - Belt is only compatible with Gates CDX CenterTrack cogs and sprockets Sizing - 108T = 1188mm - 111T = 1221mm - 113T = 1243mm - 115T = 1265mm - 118T = 1298mm - 120T = 1320mm - 122T = 1342mm - 125T = 1375mm - 132T = 1452mm - 250T (tandem) = 2000mm
$11.00 - $13.00
Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link
- 1/2" x 3/16" - Heavy duty industrial use chain for tricycles, BMX, dirt jumping and other singlespeed applications - Width: 13mm
$12.99 - $16.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible. - Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles - Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98 - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g
Z7 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
$15.00 - $16.00
The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link
- 1/8th inch chain for single speed use - Plate thickness and standard riveting - Pin width: 8.6mm - RustBuster coating (500292-05 only) increases resistance to rust; ideal for winter riding or salty environments - 399g (112L)
Page 1 of 4 Next page