Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$9.50 - $15.00
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction

$69.99
The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount.
- Accepts any standard preload bolt and top cap (sold separately)
- Insertion length: 46mm
- Contact surface length: 38mm

$25.99 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Cane Creek eeSilk Elastomer 9 - 80 Durometer, X-Firm

$99.00
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek LT G4 Elastomer Insert - Firm

$39.99
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor
-421976-3322683-1.png)
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower

Cane Creek
Cane Creek Progressive Rate VALT Lightweight Rear Shock Spring - 65mm x 400-488lbs, White
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Cane Creek eeSilk Elastomer 3 - 50 Durometer, Soft

$13.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Cane Creek eeSilk+ Elastomer 3 - 50 Durometer, Soft

$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements

$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit.
- Composite construction

$15.99
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included

$29.99
ViscoSet offers viscous damping to make bicycles safer by inhibiting the uncontrolled steering oscillation known as speed wobble. Speed wobbles are vibrations that start small and get worse due to harmonics. This frightening shimmy can affect the handling of any bicycle under certain conditions and is the result of many different factors.

$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 47mm lower headset bearings
- Compatible with 33mm (1-1/4") tapered steerer tubes
- Lightweight aluminum construction

$29.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Cane Creek Hellbender Bearing, 41mm SHIS

$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek LT G4 Elastomer Insert -Soft

$13.99
Cane Creek crown races are interchangeable between headset series.
- Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames
- May be required to fit Manitou Mastodon Mukluk Carbon frames
Page 1 of 4
Next page