Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$5.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
$8.99
The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.
$39.99
• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included
$4.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
$14.99
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.
$24.99
MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each
$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
$59.99
The Problem Solvers Chain Tensioner is a handy device when you're building a singlespeed bike and need to remove slack in the chain and keep it running smoothly. It's made of light and durable CNC-machined 6061 aluminum with steel hardware and has efficient, long-lasting nylon pulleys. It simply screws onto your frame's derailleur hanger. It even lets you adjust your chainline, too.
$19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
$11.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$12.99
The Problem Solvers Handlebar Clamp Shim adds thickness to a smaller diameter handlebar so it can be used with a larger diameter clamping stem.
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
$24.99 - $30.25
The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.
$7.49
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
$24.99
MisMatch adapters allow users to mount Shimano & SRAM brakes and shifters on one clamp. MisMatch Adapter 1.0/1.1 attaches SRAM shifters to Shimano I-Spec-A or I-Spec-B brake lever clamps. MisMatch adapters and the ever evolving “standards” it attempts to integrate between SRAM and Shimano is a confusing subject. Shimano brake and shifter mounting options have changed a lot, going through four mounting systems from 2011-2016. Shimano components have a model number printed somewhere on the brake and/or shifter, and this is the best way to determine what you own and what adapter you need. MisMatch 1.0/1.1 fits Shimano brake levers:BL-M985, BL-M988, BL-M820, BL-M785, BL-T785, BL-M675, BL-T675, BL-M640, BL-M596, BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506 - Annodized Black
$34.99 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$8.99
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
$17.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
Page 1 of 2 Next page