Lighting

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The Beamer 80 was born to be an urban warrior! It's super bright to light your way night or day. This compact light provides 80 lumens of high beam power along with Superflash and Courtesy modes. It packs a big beam but is small enough to stash in your pocket between stops. - High output surface mounted LED provides high power beam along with Courtesy & Superflash modes - FL1 Tested - Run times: 6.5 hrs (80 lm), 24 hrs (Courtesy -24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam mount adjusts or removes without tools - 63 grams

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

- High brightness 16 chip COB style LED combo set - Perfect for increasing safety on commutes and neighborhood rides - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 60

- High brightness 16 chip COB style LED light - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 30 - Mount: rubber strap

- High power 20 lux LED light, more than 50,000 hours life span - Integrated retro reflector to be better seen by oncoming traffic - Compatible with 6-12V E-bike battery - Optimal light distribution by our double lens technology - Clear lens technology, you are also visible from the side - Compact, sportive design - 80g

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 150 - Run Time: 18:00 – 72:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Looking for a bright, small set of lights you can mount almost anywhere? Planet Bike’s Spok Set is the logical choice. The translucent case offers 220 degrees of visibility. Steady and flashing modes give you up to 100 hours of run time. Rubber mounting straps allow for mounting on handlebars, helmets, and seat posts of all shapes and sizes. These lights are so small they almost disappear in a jersey pocket, so there's no reason not to throw them in before you take off on a warp-speed ride.

Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

- Single super bright LED safety light combo set - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes per light - Steady and flash

The Grid Front Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Front Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Specs - Max Lumens: 200 - Weight: 47.5g - Max Runtime: 20 hours - Recharge Time: 2:15

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

The rebirth of an iconic bicycle light, the Frog Front Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 40 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 80 hour runtime - Simple one-button operation - Available in 6 fun-loving colours