Tools

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

The Surly Jethro Tule rocks. It's made from tough, polished stainless steel and sports dual-purpose functionality. One end is the 15mm offset box end wrench you need to take your wheels off. While the other end provides stellar leverage and a bottle opener! That's two of the tools you need, in your pocket, all the time.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

Sometimes the task at hand requires more hands than available. If you've ever worked with some of the more finicky bicycle brakes, you know what we are talking about. Pedro's Cable Puller (commonly known as the "Fourth Hand Tool") provides the perfect tool for tensioning brake or derailleur cables while making adjustments. Featuring one hand operation, ergonomic cushioned handles, and a thumb lock, this tool simultaneously grips and tensions the cable while keeping your other hand free to secure the cable in place. End the frustration and pick one up! Made from heat-treated laser-cut steel.

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

- Used to install fork dust seals

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

- Use to install fork dust seals