29-Inch

Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 30 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels feature OCLV Carbon rims with a 29mm inner width and will shave weight and add stiffness to your ride. - OCLV carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool - No rider weight limit

Upgrade to our lightest, fastest XC MTB wheels, ridden to victory by the pros of Trek Factory Racing. Race to win Kovee RSL 30 is an ultra-light and durable carbon XC wheel designed to race and win at the highest level, complete with a lower profile rim and smooth-rolling DT Swiss 240s that shave even more weight to create our lightest MTB wheelset ever. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Premium-level OCLV Carbon rim with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Ultra-light DT Swiss 240s hubs with ratchet EXP XD Freehub roll smooth and fast - Bead lock rim design and pre-installed TLR tape and valve makes tubeless setup easy - Boost 110/148, 24 spoke front and rear with Sapim CX-Ray bladed spokes and locking nipples (14/17) - CenterLock disc with Ratchet EXP XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: Our lightest ever A meticulously sculpted shallower profile saves weight and offers a more compliant, faster-rolling ride that begs for hard accelerations and is ready to float up climbs. Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

A durable Tubeless Ready mountain wheel with Rapid Drive 54 hub. Ready to rail on any trail With Line Comp 30, you'll feel the impact of wider rims on the quality of your ride. control. Product details - Rapid Drive 54 hub efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - 142x12 and 100x15 thru-axle spacing is convertible to 135x5 and 100x5 QR - Ultra-durable rim with 29mm internal, 34mm external width, 28 hole fr/r - Does not include skewer, reflector, rim strip, valve, or owner's manual

If you want a lightweight XC wheel that's ready to race, look no further than Kovee Pro 30. It features a lightweight design and 29mm internal width for better traction and cornering performance so you can ride faster and with more confidence. Plus, the Rapid Drive 108 hub provides near instantaneous engagement so you get out exactly what you put in. - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width, 28 hole front/rear - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool - No rider weight limit

Admit it—your bike would be a whole lot sweeter if you were riding carbon. Enter the Kovee Elite 23 wheelset. Designed with the XC and trail rider in mind, these Boost-width wheels will shave weight and add stiffness to your ride. Key features: - OCLV Carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable OCLV Carbon rim with 22.5mm internal 29mm external width 28 hole fr/r - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool

A light, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Good things last A lightweight carbon mountain bike wheelset ready to tackle any trail and stand up to that rock you just didn't see. Line Pro 30 features best-in-class strength and durability and even helps prevent pinch flats. Plus, simple tubeless setup makes it easy to unlock their full potential and run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Ultra-durable OCLV Pro carbon provides a lighter layup for the ultimate in lightweight strength - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear DT Swiss Competition Race 14/16G spokes with Alpina alloy locking nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit

Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

Hand-built to A-Class specifications, the 359 wheel with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved - 30.5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures

- A high-performance alloy rim designed for freeride, enduro, and downhill race use - Tubeless-ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish to increase fatigue life and make it more durable

- Designed for cross-country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - M-pulse hubs - Sapim Force Black 2.0/1.7/1.8mm spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

- The Ultra-light carbon XC wheel - Hookless rim wtih an internal width of 26mm, mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4”. - Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. - Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. - The ultra-light, yet durable, 370-gram rim measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. - These specs total up to a 1380-gram wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding.

29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double wall rims w/32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Shimano Deore Disc Hubs

- Laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. - M-pulse Hub - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires

Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.

From 2021 SCOTT-SRAM MTB racing will ride Syncros wheels. The team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht will all ride Silverton SL one piece carbon wheels at the World Cup. This year we are adding a new wider 30mm version to the teams quiver. For some time now the team riders have been riding 2.4” Maxxis tires on 30mm rims offering them lower rolling resistance and great grip at lower pressures. The new wider version of the Silverton SL offers the same great benefits of the original wheel.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Alex MD21 disc-specific double-wall 29er / 700c rim, Black - Formula DC-20/DC-22 hubs - Suitable for Cross-Country, light Trail riding, CX and Road Disc - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 500g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.

Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc

Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc

Fun is fast, fast is fun Kovee Comp 25 is a modern XC mountain bike wheel that delivers a great balance of ride quality, durability, and value, complete with a modern 25mm inner width, durable alloy rims, and a quality Rapid Drive 108 hub. Product details - Alloy rim with 25mm inner width, 30mm outer width, and 10mm depth - Shallow profile adds compliance and 25mm rim width increases tire support - Rapid Drive 108 XC j-bend hub with splined driver ring offers 108 points of engagement - Tubeless ready rim comes with TLR rim strip and valve pre-installed for easy setup - Boost 110/148, 28 spoke front and rear with Grand Forza spokes and nipples (14/14) - 6-bolt disc with SRAM XD driver, additional freehubs available - No rider weight limit Confident tire support Modern rim profile with 25mm inner width offers great tire support for traction and confidence in the corners and across technical terrain. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance. Rapid Drive 108 XC Rapid Drive 108 XC hubs save weight and offer 108 points of engagement for quick acceleration and confident pedaling through technical sections.

Level up with the proven speed, durability, and ride quality of modern carbon mountain bike wheels. Lighter wheels for a faster you Kovee Elite 30 is a durable carbon XC wheel designed to level up every ride, complete with elite-level OCLV Carbon rims, a shallower profile, and quick-engaging Rapid Drive 108 XC hubs. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Elite-level OCLV Carbon rims with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Rapid Drive 108 XC hub with a splined drive ring shaves weight while adding durability - Tubeless ready rim comes with TLR rim strip and valve pre-installed for easy setup - Boost 110/148, 28 spoke front and rear with Grand Forza spokes and nipples (14/15) - 6-bolt disc with SRAM XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: All-new rim shape The same rim profile of our industry-leading Kovee RSL wheels in a more modest build perfect for budget-concious riders looking for a value-packed performance upgrade. Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

Kovee Pro offers the speed and performance of our latest carbon rims with a more modest hub spec for an XC MTB wheel that punches way above its price tag. Light. Fast. Strong. Kovee Pro 30 is a light and durable carbon XC wheel that takes every ride up a notch thanks to pro-level OCLV carbon, a lower profile, and lightweight Rapid Drive 108 XC hubs. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Pro-level OCLV Carbon rim with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Rapid Drive 108 XC hub with a splined drive ring shaves weight while adding durability - Tubeless ready rim comes with TLR rim strip and valve pre-installed for easy setup - Boost 110/148, 28 spoke front and rear with Sapim CX-Ray bladed spokes and locking nipples (14/17) - 6-bolt disc with SRAM XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC71(Black), Laser etched logo, 15mm TA, O.L.D. 100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Sealed bearings - TA Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Full carbon fiber construction - Tubeless ready rim (tape and valves installed) - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

- 6069 rim material with 30mm internal width, delivers impressive rim durability and impact resistance - 4.5mm offset improves spoke (32h) tension balance, increasing wheel stiffness and strength - Trace hubs deliver eMTB rated strength for every rider with 10 degrees of engagement

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub with Ratchet LN 18pt - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

When you head into trouble on the trail, be it up or down, the HX 1501 Spline One will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry leading rim alloy and profile design, the HX 1501 SPLINE ONE 30 isn't a one day wonder, but a trusty longterm partner. - 240s based Spline hub with 24 tooth ratchet system and steel Shimano freehub body - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36 tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Fun is fast, fast is fun Kovee Comp 25 is a modern XC mountain bike wheel that delivers a great balance of ride quality, durability, and value, complete with a modern 25mm inner width, durable alloy rims, and a quality Rapid Drive 108 hub. Product details - Alloy rim with 25mm inner width, 30mm outer width, and 10mm depth - Shallow profile adds compliance and 25mm rim width increases tire support - Rapid Drive 108 XC j-bend hub with splined driver ring offers 108 points of engagement - Tubeless ready rim comes with TLR rim strip and valve pre-installed for easy setup - Boost 110/148, 28 spoke front and rear with Grand Forza spokes and nipples (14/14) - 6-bolt disc with SRAM XD driver, additional freehubs available - No rider weight limit Features: Confident tire support Modern rim profile with 25mm inner width offers great tire support for traction and confidence in the corners and across technical terrain. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance. Rapid Drive 108 XC Rapid Drive 108 XC hubs save weight and offer 108 points of engagement for quick acceleration and confident pedaling through technical sections.

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto our Vault Hub gives you a stronger, stiffer wheel construction and the Vault’s Super Fast Engagement, long bearing life, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - Low drag labyrinth cassette body seal - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double-wall rims w/ 32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Formula 6-bolt disc

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

A system for speed. Our one piece wheelset is a miracle of modern carbon fibre techniques. Hub shell, spokes and rim are molded into one piece producing one of the lightest wheels on the market with three distinct benefits - Torsional & lateral stiffness and low inertia all translating to a faster ride both in accelleration and momentum and better handling. This is the 26mm internal width version of the wheel as used by the Scott-Sram team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht at the Cross Country World Cup. KEY FEATURES - Used by Scott-SRAM - One piece wheel - Super lightweight XC focused - Tubeless Everready

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight

Kovee Pro offers the speed and performance of our latest carbon rims with a more modest hub spec for an XC MTB wheel that punches way above its price tag. Light. Fast. Strong. Kovee Pro 30 is a light and durable carbon XC wheel that takes every ride up a notch thanks to pro-level OCLV carbon, a lower profile, and lightweight Rapid Drive 108 XC hubs. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Pro-level OCLV Carbon rim with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Rapid Drive 108 XC hub with a splined drive ring shaves weight while adding durability - Tubeless ready rim comes with TLR rim strip and valve pre-installed for easy setup - Boost 110/148, 28 spoke front and rear with Sapim CX-Ray bladed spokes and locking nipples (14/17) - 6-bolt disc with SRAM XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

On an eMTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again. - 350 based Spline hub with 24 tooth ratchet system and steel freehub body - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes SRAM XD driver/end cap, tubeless tape and tubeless valve

When you head into trouble on the trail, be it up or down, the HX 1501 Spline One will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry leading rim alloy and profile design, the HX 1501 SPLINE ONE 30 isn't a one day wonder, but a trusty longterm partner. - 240s based Spline hub - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

The new standard in modern day, high performance XC and All Mountain wheelsets. With its hookless full carbon and tubeless ready rim, the XRC 1200 strikes a perfect balance between lightweight and aggressive riding-readiness. Its intricately machined hubshell is superlight while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel really sets the benchmark for going fast up and down, whether it's between the tape or not. - Tubeless ready wide and light carbon rim - 180 EXP hub with straight-pull DT spokes, 3-cross pattern - Factory installed tubeless-ready tape - Includes tubeless valve, 6-bolt rotor adapter, tools and wheel bag

If cross country means high speed after work rides and the occasional endurance race to you, then have a closer look at the XR 1700 SPLINE wheel. The lightweight and welded aluminum rim, laced with competition spokes and reliable 350 hub, create a snappy accelerating wheel. - Welded Aluminum rim with 25mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Cross Country applications

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

A system for speed. Our one piece wheelset is a miracle of modern carbon fibre techniques. Hub shell, spokes and rim are molded into one piece producing one of the lightest wheels on the market with three distinct benefits - Torsional & lateral stiffness and low inertia all translating to a faster ride both in accelleration and momentum and better handling. This is the 30mm internal width version of the wheel as used by the Scott-Sram team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht at the Cross Country World Cup. - One-piece wheel - Super lightweight XC-focused - Tubeless Everready

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Sram 900 XDR Boost - 12x148mm Thru-Axle (Axle not included) - 6 Bolt Disc Mount - Sealed cartridge bearings - Sram Double Time 4-Pawl Ratchet Freehub, 52 Points of Contact, 6.9 degree engagement angle - Compatible with 11,12 speed XD (1.85mm spacer included) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight